Slide Mounting Media
Electron Microscopy Sciences Citifluor™ Mountant Solution AF100, Glycerol Free, Hardening 5 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. A PBS solution of an amine-based antifadent that if used as an additive to CFPVOH (1:9).
Material: Glycerol Free
Type: Hardening
Rarecyte RareCyte CyteMount Mounting Media
A solution that enables a coverslip to adhere to a microscope slide.
Electron Microscopy Sciences Epo-Fix Embedding Kit Small Clear
A two component epoxy resin, characterized by negligible shrinkage during curing and good mechanical properties in its hardened state. It is particularly suited for embedding hard samples of complicated shape and for vacuum impregnation. Samples such as paper, silicon, ceramics, metals, wafers, and chips are suitable to be used with Epo-Fix. Kit consists of: 1 kg resin, 120 g hardener, 15 cups, 15 stirrers, 1 x 5 mL and 20 mL syringes.
Electron Microscopy Sciences DEPEX Mounting Media, 500ml
DEPEX Mounting Media is a colorless, neutral, xylene miscible mountant which is suitable for preparations where Canada Balsam is usually used. It comes in the amount of 500ml.
Electron Microscopy Sciences LR White Resin Hard - Grade Kit
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues. It is available in medium and hard grade. Kit consists of: 500 ml LR White Resin, 10 ml UV accelerator.
Electron Microscopy Sciences Embed 812 Resin 450 ML
EMbed 812 has the same characteristics as Epon 812, physically, and provides the same results in preservation, handling, curing and sectioning. EMbed 812 may cause etching on selected plastics. All formulas for mixing and using Epon 812 can be applied to EMbed 812, e.g. Luft's procedure, Mollenhauer's and EPON-ARALDITE mixtures.
Electron Microscopy Sciences Technovit Medium 4000 Large Kit
Technovit 400 is a fast curing, cold polymerizing, three-component resin, which is based on a modified polyester, and it is available in the form of powder, syrup I, and syrup II. It is mixed at a ratio of 2:2:1 (powder:syrup I:syrup II). Syrup I and Syrup II are mixed together first and the powder is mixed in last. The color is white opaque.
Technovit 4000 is distinguished by its low shrinkage when polymerizing and its perfect margin fit. Due to its excellent flow characteristics, Technovit 4000 guaranteed that geometrically demanding samples are optimally embedded. Its excellent adhesion properties with regard to metal are a guarantee of gapless embedding of all metal samples. These properties are of particular importance when working with samples that require good edge definitions.
After mixing, Technovit 4000 can be used for casting for approximately 4 minutes and takes approximately 8 minutes to cure.
Electron Microscopy Sciences EMS Silver Conductive 18DB70X Coating 15 GR
Silver Conductive Coating 18DB70X is a direct substitute for Silver Conductive Fluid 416, which is no longer available. This material was specially formulated for use in geographic areas that demand the use of low VOC (Volatile Organic Compounds) products. It also provides low ohms at very thin dry film thickness on almost any surface, and exhibits excellent long term shielding and grounding properties.
Electron Microscopy Sciences LR White resin only; Med. Grade Catalyzed
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues. It is available in medium and hard grade.
Electron Microscopy Sciences EUKITT Mounting Medium 100 ML
Eukitt is a mounting medium (5% Acrylic Resin and 55% Xylenes) that is used in microscopy. It is an adhesive and specimen preservative that can be used manually and in automated coverslipping equipment. Special purpose adhesive and sealant for use with glass, non plastic and other non-reactive materials. It spreads quickly and evenly withoutforming any air bubbles. It is fast-drying (20 minutes) with a refractive index close to glass. Chemically neutral and has no reaction to staining.
Electron Microscopy Sciences Graphite Spray Adhesive 450 GR
An easy to use graphite spray to coat small samples. It is fast drying and produces a very flat, thin, and uniform graphite film. Its service temperature is up to 204 degree C. It's electrical resistance is 1.2 kohm/sq" at 1 ml thickness.
Electron Microscopy Sciences EMS CCC Carbon Adhesive 30 GR
An electrically Carbon Conductive Cement for specimen mounting in all SEM work. After drying of the cement, immediate investigation of conductive specimens is possible. Non-conductive specimens need only to be coated with carbon or metal. Thinner is available if the cement viscosity is too thick.
Electron Microscopy Sciences Tempfix Adhesive Set
A thermoplastic adhesive for mounting powder specimens and small particles for SEM. It does not contain any solvents and it is stable in high vacuum. It is not sticky at room temperature but becomes adhesive at 40 degree C and melts at 120 degree C. Tempfix may also be used as an embedding medium. EMS introduces a new reliable line of conductive adhesives which are certified by the Bureau Veritas Quality International. Quality Standards: ISO 9001; EN29001; ANSI/ASQC Q91